現場施工現場的配電箱應建立起保護棚。在此基礎上搭建防護棚，以保護施工人員及工作人員的生命安全。(廣東省工地配電箱防護棚銷售廠家13621473961）

A protective shed should be established for the distribution box on the construction site. On this basis, a protective shed is built to protect the safety of construction personnel and workers. (Guangdong Province Construction Site Distribution Box Protective Shed Sales Manufacturer 13621473961)

配電箱頂部應設置兩道防護罩，其作用是防止雨淋、防砸。柵欄主框采用40*40方管焊制，方管間距為15cm，高2.8m，長寬為1.5-2m，再正面設防護門?？砂纯蛻粢蠹庸ざㄗ觥?/p>

Two protective covers should be installed on the top of the distribution box to prevent rain and impact. The main frame of the fence is welded with 40 * 40 square tubes, with a spacing of 15cm between the tubes, a height of 2.8m, a length and width of 1.5-2m, and a protective door on the front. We can process and customize according to customer requirements.

配電箱防護棚采用組合式拼接方式，首先將其做成標準部件，然后在架設時與標準件結合，最上層采用雙層壓型鋼板，有效防止高空物體跌落。又可保證棚內使用空間增大，又有大氣美觀的特點。

The protective shed of the distribution box adopts a combination splicing method. Firstly, it is made into a standard component, and then combined with the standard component during installation. The top layer is made of double-layer profiled steel plate, effectively preventing objects from falling from high altitude. It can also ensure an increase in the usable space inside the shed, while also having the characteristics of atmospheric beauty.

配電箱防護棚以其富于靈活性和耐沖擊、不褪色、不開裂的特點，被廣泛應用于工地、學校等場所。

The distribution box protective shed is widely used in construction sites, schools, and other places due to its flexibility, impact resistance, non fading, and non cracking characteristics.

當今建筑行業我們都在大力倡導和實施建筑安全施工，做到建筑文明施工單位。為降低施工事故的發生，我國頒布了一系列在施工過程中必須安裝個性化、工具化的防護裝置，不但保證了施工人員的安全，而且提高了施工進度，工地配電箱防護棚就是其中之一。漢坤實業現場配電箱護棚組裝設計，安裝方便，采用高溫烤漆噴漆，色彩亮麗，全焊焊接，質量可靠。

In today's construction industry, we are vigorously advocating and implementing safe construction in buildings, striving to be a civilized construction unit. In order to reduce the occurrence of construction accidents, China has issued a series of personalized and tool based protective devices that must be installed during the construction process. This not only ensures the safety of construction personnel, but also improves the construction progress. One of them is the construction site distribution box protective shed. Hankun Industrial's on-site distribution box protective shed assembly design is easy to install, using high-temperature paint spraying, bright colors, fully welded, and reliable quality.

按照《建設工程臨時用電管理條例》，臨時用地配電箱防護棚周圍2米以內，不得堆放雜物或工具。根據《建設工程臨時用電安全技術規程》，施工現場臨時用電應符合規定，變壓器主電源箱由土建工程管理中心電氣專業工程師負責管理，各主體施工部門到指定的主電源箱接電。建筑工程臨時用電分為“一、二、三、四、五”用電箱，在現場用電一般是將臨時變壓器連接到施工現場，并在第一級用電箱內設置專用臨時用電室。

According to the Regulations on the Management of Temporary Electricity Use in Construction Projects, no debris or tools shall be piled up within 2 meters around the protective shed of the temporary land distribution box. According to the Technical Regulations for Safety of Temporary Electricity Use in Construction Projects, temporary electricity use on construction sites should comply with regulations. The transformer main power box is managed by the electrical professional engineer of the Civil Engineering Management Center, and each main construction department should connect the electricity to the designated main power box. Temporary power supply for construction projects is divided into "one, two, three, four, and five" power boxes. On site power supply is generally achieved by connecting temporary transformers to the construction site and setting up a dedicated temporary power room in the first level power box.

二是接通第一級用電箱時，必須放置在施工現場布置好的地方，不得隨意移動，并設置臨時用電保護棚。二次配電箱護棚的棚體是由四面2.4m(高)×1.96m(寬)的護欄網拼接而成，柵欄外側立桿長30mm，厚2.5mm的方矩管，厚2mm的方矩管構成。車棚是由一個特殊的邊框縫合而成，四面500mm(高)×2420mm(寬)，邊長為30mm，厚2.5mm的方矩管焊接而成。

Secondly, when connecting the first level electrical box, it must be placed in a designated location on the construction site and must not be moved arbitrarily. A temporary electrical protection shed should also be set up. The protective shed of the secondary distribution box is composed of four sides of 2.4m (height) x 1.96m (width) fence mesh spliced together. The outer pole of the fence is 30mm long, with 2.5mm thick rectangular tubes and 2mm thick rectangular tubes. The carport is made up of a special frame sewn together, with four sides of 500mm (height) x 2420mm (width), a side length of 30mm, and a thickness of 2.5mm square rectangular pipes welded together.

車棚和車棚的連接由每一面伸出的支架(25mm×2mm)鑲?cè)肱锷砹U(30mm×2.5mm)內。保護棚采用40mm×40mm的方矩管焊接，棚身方矩管間距為15cm，總高2.8m，寬1.5~2m。擋板正面設置有柵欄門。三、電箱連接二次用電箱內，三級電箱必須做到“一箱一漏，一閘一漏”，不能出現在一個漏電保護器下連接兩個及多個用電設備。三級電箱一般移動性大、移動性強，必須固定好位置做好接地。建筑現場電力供應須采用TN-S接零保護系統，嚴格按現場臨時用電規范執行。

The connection between the carport and the carport is made up of brackets (25mm × 2mm) extending from each side and embedded into the vertical poles (30mm × 2.5mm) of the carport body. The protective shed is welded with 40mm × 40mm square rectangular pipes, with a spacing of 15cm between the square rectangular pipes of the shed body, a total height of 2.8m, and a width of 1.5-2m. The front of the baffle is equipped with a fence gate. 3、 The electrical box must be connected to the secondary electrical box, and the tertiary electrical box must achieve "one box, one leakage, one switch, one leakage". It is not allowed to connect two or more electrical equipment under one leakage protector. Third level electrical boxes generally have high mobility and strong mobility, and must be fixed in place and grounded properly. The power supply at the construction site must adopt TN-S neutral protection system and strictly follow the temporary electricity regulations on site.